5165 Manager of Offset Printing Maintenance. 25 years experience. Oversee all maintenance activities on Offset printing presses used for the decoration of plastic molded food and drink containers. Additional Offset Printing production supervision experience.

5162 Pipe Extrusion Manager, Polyethylene. Ten years "hands on" PE pipe extrusion production, processing, and management experience at just two facilities. Open to relocate anywhere USA. Last salary was around $59, 000 annually.

5160 Offset Printing Press Maintenance Technician. Offset Printing on plastic molded items. Troubleshoot and fix any problems with offset printing presses. Additional knowledge in stacker machine repair and rebuild. Makes $18.50 per hour plus overtime.

5149 Plastic Profile Extrusion Engineer with BS Technical degree and over 20 yrs profile extrusion, design, processing, and manufacturing experience. Makes around $77,000. Prefers the midwest.

5148 Offset Printing and Graphics Manager.  Twenty-five years "hands on" experience printing on plastic injection molded and thermoformed products.  Knows press setups and change-overs, processing, press maintanence, pre-press, scheduling, graphics, customer face to face, Offset Print Room management, and Lean Manufacturing. Prefers the warm southeast and southcentral states.

4940. Twenty-five years "hands on" plastic extrusion equipment technical expert on all systems: electrical, mechanical, hydraulic, pnuematics. Installations, troubleshooting, training the technicians, developing the process, etc. Packaging, laminations, decking profiles, and coatings. Laminated, Woven Polypropylene bags. Knows 10 color flexographic water based printing. Plastic sheet extrusion and cast sheet, blown film. Open to relocate. Salary $63,000 to $80,000.

4822. Extrusion Manager with “hands on” PVC pipe extrusion experience on both single and twin screw extruders. Prefers the Western USA as a Production Manager, Plant Manager, or Materials Manager. Hourly rate plus overtime puts him around $55,000 yearly.

4107. Extrusion Manager with over 22 years “hands on” working supervision experience. College Degreed. Prefers NC, SC, GA, or FL. Open to relocate for positions of shift supervisor or preferably an extrusion manager over 3 shifts. PVC pipe up to 12 inches. Salary around $51,500.

4818 28 years with one company. Excellent "hands on" plastic extrusion experience with both single and twin screw extruders. Also knows maintenance, embossing, die fine tuning, Six Sigma Green belt, and supervision. Owns a house. Plant closing soon. His Cobra extends until August 2007. Prefers Midwest and southern states. Salary around $63,000.

4834 Department Manager through General Manager. 17 years. Experience is primarily in injection molding and tooling with a year in extrusion. At least 30 to 50 percent of the time is spent on the floor with the people, processes, and machinery. Markets/products: Automotive, medical, consumer, electrical, electronics, packaging, caps/closures, agricultural, and more. Hands-on and management experience with production, quality, engineering, safety, process improvement (sampling), assembly, decorating, customer service, sales, logistics, project management, and purchasing. Prefers the upper Illinois area. Salary around $76,000.

4819 Degreed BSME with 26 years total. 21 in plastic pipe extrusion of polyethylene and polybuterate potable water pipe, corrugated brass tubing, injection molded fittings. Past 5 years in Management of Assembly and Quality Control. Salary around $92,000. Open to relocate to warm winter areas.

4831 18 years plastic extrusion supervision, production, and management experience with PVC profiles, PVC and PE pipe, some corrugated tubing, and PVC window lineals.

4774 Quality Engineering Technician with 19 years experience with plastic injection molding quality systems including PPAP, FMEA, Process Flow, SOP’s, 8D, 5P, ISO & QS. Products are for Automotive, Medical, and Custom molding clients. Presses range from 75 tons up to 1600 tons. Prefers Ohio and Indiana area. Salary around $44,000.

4770 Plastic Injection Molding Supervisor for the Midwest. 14 years hands on plastic injection molding processing, supervision, PPAP APQP, QS9000, injection presses up to 1600 tons, ranging around 500 tons. Polycarbonate, PP, ABS materials, lenses for lighting and automotive, furniture industry plastic parts, and custom molding. They have eleven injection presses. $18.50 per hour.

4772 General and Upper Level Manager. Degreed with 14 years experience in production, maintenance and plant engineering for plastic injection, extruded corrugated pipe, extruded tubing, blow molding, and high speed manufacturing. Knows JIT, Lean, SMEAD, Six Sigma. Salary around $114,000.

4721. Automation and Machine Designer. Over 20 years plastic equipment rebuilding, maintenance, preventative maintenance, technical service experience. Design a variety of production machinery in the manufacturing and product handling of Plastic injection molding, plastic cups, custom extrusions. Provide plant support to multiple U.S. and overseas manufacturing plants.

4720. Degreed Shift Supervisor. Bilingual (English, Spanish). One year Manager of Shift Operations in Plastic Blow molding and Injection Molding. Ensure safety, quality, and efficient operation. . Provide technical training, leadership and direction of shift personnel. He is open to any shift, any location, and is making around $45,000 now.

4700. Processing Technician with twenty-two years total in plastics, the past 18 years of which have been in PVC profile extrusion (for door and window lineals) and solid plastic decking (1 X 6), a little extruded sheet (acrylic, polycarbonate, and ABS), some plastic tubing (12 inches dia.), and fiber optic cable ribbon production. Knowledgable in tooling, die fine tuning, and die repair. Knows both twin screw and single screw. Makes $21.50 per hour plus overtime. Prefers South or North Carolina.

4715. Entry Level Plastics Manufacturing Technology Graduate with two summer’s co-op work with companies that supplied Honda and Chrysler assembly plants. Prefers to remain within three hours drive of Indianapolis, Indiana. Salary around $38,000.

4679. Truly Experienced Plastics Plant Manager with 30 years "hands on" plastics manufacturing, molding, supervision, maintenance, and assembley experience. Knows plastic injection molding, PVC pipe extrusion (up to 14 inches, single and twin screw), coextrusion, 5S, TL-9000 certified, FDA, QS-9000, and Human Resource Management. Prefers the Coastal Southeastern USA. Salary around $69,000.

4333 Maintenance Supervisor
Thermoforming, Extruded Sheet, Offset Printing. Twenty-two years "hands on" experience in maintenance, machine rebuilding, and preventative maintenance on wide plastic and foam sheet, blown film, thin gauge thermoforming, corrugated paper sheet presses, and offset printing presses. Very good supervisory and maintenance management experience, too. Prefers the southeastern USA